Product Description:
Rohde & Schwarz, Inc. FSH313 Handheld spectrum analyzer 100 kHz - 3 GHz, RBW 1 kHz - 1 MHz LCD color display, tracking gen. (P/N 1145.5850.13)
Data sheet (PDF)
The Rohde & Schwarz, Inc. FSH313 spectrum analyzer is a wide band, very sensitive receiver. It works on the principle of "super-heterodyne receiver" to convert higher frequencies (normally ranging up to several 10s of GHz) to measurable quantities. The received frequency spectrum is slowly swept through a range of pre-selected frequencies, converting the selected frequency to a measurable DC level (usually logarithmic scale), and displaying the same on the CRT of the Rohde & Schwarz, Inc. FSH313. The CRT displays received signal strength (y-axis) against frequency ( x-axis).
Some applications for Rohde & Schwarz, Inc. FSH313 Spectrum Analyzers include Site Monitoring: Verify that the frequency and signal strength of your transmitter is accurate. Interference: Before a system is installed you use a Rohde & Schwarz, Inc. FSH313 spectrum analyzer to verify that the frequencies (you plan to use) are not occupied or if the presence of a very strong signal will interfere with your new setup. Interference can be created by a number of different situations. Other tests that utilize the Rohde & Schwarz, Inc. FSH313 spectrum analyzer features include antenna isolation, co-channel interference, adjacent channel power, occupied bandwidth, intermodulation, microwave or satellite antenna alignment, and characterization of components.
The FSH is the ideal spectrum analyzer for rapid, high-precision, cost-effective signal investigations. It provides a large number of measurement functions and so can handle anything from the installation or maintenance of a mobile radio base station up to on-site fault location in RF cables as well as development and service -an extensive range of applications. Due to its excellent characteristics, the FSH is used on board the International Space Station (ISS) for distance-to-fault measurements on RF antenna cables.The tracking generator extends the R&S FSH3`s range of applications to cover distance-to-fault (DTF) measurements on cables, scalar and vector network analysis and 1-port cable loss measurement.
Features
- Frequency range 100 kHz to 3 GHz
- High level accuracy : 0.5 dB typ
- Displayed average noise level typ. -114 dBm (RBW 1KHz)
- Resolution bandwidths 1kHz to 1 MHz, 1 and 3 steps
- Wide range of detectors : sample, max/min peak , auto peak, RMS
- Tracking Generator from 5 MHz to 3 GHz
Supplied with:- Battery Pack
- AC Power Supply
- RS-232 Optical Intfc Cable
- CD-ROM
- Headphones
- AC Mains Adapter (EU)
- AC Mains Adapter (UK)
- AC Mains Adapter (US)
- Quick Start Manulal English Ver 5.0
Performance Characteristics of the FSH313
| Form Factor |
Handheld |
| Type |
Analyzer |
| Input Impedance |
50 Ohm |
| Minimum Frequency |
100 kHz |
| Maximum Frequency |
3 GHz |
| Minimum Resolution Bandwidth |
1 kHz |
| Maximum Resolution Bandwidth |
1 MHz |
| Minimum Video Bandwidth |
10 Hz |
| Maximum Video Bandwidth |
1 MHz |
FSH313 Compliance
| CE Compliance |
Compliant
|
| UL Compliance |
Compliant
|
FSH313 Power Requirements
| Battery Requirement |
NiMH
|
| Battery Life |
4 hrs
|
FSH313 Physical Dimensions
- Width: (N/A)
- Height: 120 mm(4.72 in)
- Length: 270 mm(10.62 in)
- Weight: 2.5 kg(5.51 lb)