| Seller comments: |
The FiTel S198A is the ideal fusion splicer for all of your ribbon fiber fusion splicing needs. This unit splices singlemode as well as multimode fiber ribbons. The S198A will splice 1, 2, 4, 6, 8, 10, and 12-fiber ribbons. This unit is fully functional and in like-new condition, showing little to no wear!
Specifications
Fiber Cladding Diameter: 125um
Single Fiber Coating Range: 250um, 900um
Applicable Fiber Ribbons: 1-, 2-, 4-, 6-, 8-, 10-, and 12- fiber ribbons
Fiber Pitch in Ribbon: 250um
Ribbon Thickness: 250um, 400um
Fiber Strip Length: 10um
Average Splice Loss
* Single-mode: 0.05dB
* Multimode: 0.03dB
* Dispersion Shifted: 0.08dB
Environmental
* Operating Temperature: -10 to 50 degrees celsius
* Storage Temperature: -30 to 60 degrees celsius
* Humidity (Non condensing): up to 95 R.H.
Electrical
* Input Terminals from AC Supply: 85 to 264 VAC
* Input Terminals fron DC Supply: 9 to 16 VDC (12 VDC Typical)
Power Consumption
* Typical: 20 Watts
* Maximum: 16 Watts
Fuse: 250 VAC
Dimensions
* Splicer: 190 x 190 x 200 mm
* Transit Case: 450 x 275 x 375 mm
Weight
* Splicer: 9.5 kg
* Transit Case: 14.5 kg
Splice Data Storage: 100 Splices
Splice Program Storage: 3 x 7 x 9
Splice Time: 85 sec. (4 ribbon fiber)
Reinforcing Time: 150 (with S924)
Included:
* FiTel S-198A Ribbon Fusion Splicer
* FiTel 12 Fiber Holders
* FiTel S321 Fiber Cleaver
* Fujikura HJS-01 Hot Jacket Stripper
* Power Cord
* Power Cable for HJS-01
* Users Manual
* Hard Carrying Case |