Product Description:
Anritsu MS2601B 9 kHz to 2.2 GHz Spectrum Analyzer
Data sheet (PDF)
The Anritsu MS2601B spectrum analyzer is a wide band, very sensitive receiver. It works on the principle of "super-heterodyne receiver" to convert higher frequencies (normally ranging up to several 10s of GHz) to measurable quantities. The received frequency spectrum is slowly swept through a range of pre-selected frequencies, converting the selected frequency to a measurable DC level (usually logarithmic scale), and displaying the same on the CRT of the Anritsu MS2601B. The CRT displays received signal strength (y-axis) against frequency ( x-axis).
Some applications for Anritsu MS2601B Spectrum Analyzers include Site Monitoring: Verify that the frequency and signal strength of your transmitter is accurate. Interference: Before a system is installed you use a Anritsu MS2601B spectrum analyzer to verify that the frequencies (you plan to use) are not occupied or if the presence of a very strong signal will interfere with your new setup. Interference can be created by a number of different situations. Other tests that utilize the Anritsu MS2601B spectrum analyzer features include antenna isolation, co-channel interference, adjacent channel power, occupied bandwidth, intermodulation, microwave or satellite antenna alignment, and characterization of components.
Performance Characteristics of the MS2601B
| Form Factor |
Benchtop |
| Input Impedance |
50 Ohm |
| Minimum Frequency |
9 kHz |
| Maximum Frequency |
2.2 GHz |
| Zero Span |
Yes |
| Minimum Span |
1 kHz |
| Maximum Span |
2200 MHz |
| Minimum Sweep Time |
50 ms |
| Maximum Sweep Time |
1000 s |
| Minimum Resolution Bandwidth |
30 Hz |
| Maximum Resolution Bandwidth |
1 MHz |
| Resolution Bandwidth Steps |
1/3/10 |
| Minimum Video Bandwidth |
1 Hz |
| Maximum Video Bandwidth |
100 kHz |
| Video Bandwidth Steps |
1/10/100 |
| Maximum Single-Side-Band Noise |
-80 dBc/Hz |
| Maximum Safe AC Input |
25 dBm |
| Maximum DC Input |
50 V |
| Maximum Displayed Average Noise |
-120 dBm |
| Maximum Dynamic Range |
-75 dB |
| Trigger Source |
External,Internal |
| Trigger Modes |
Freerun,TTL |
| 2nd IF Input Connector Type |
BNC(f) |
| Probe Power |
No |
| External Frequency Reference |
10 MHz |
| Noise Source Driver |
No |
Programmability/Connectivity of the MS2601B
| User Interface |
Proprietary
|
| Ports to Peripheral Devices |
GPIB
|
| Test Pattern Storage |
6 Patterns
|
| Data Storage Type |
PCMCIA
|
| External Video Out |
Yes
|
MS2601B Compliance
| CE Compliance |
Not on file
|
| UL Compliance |
Not compliant
|
MS2601B Power Requirements
| Input Power |
USA (110V/60Hz)
|
MS2601B Physical Dimensions
- Width: (N/A)
- Height: 177 mm(6.96 in)
- Length: 451 mm(17.75 in)
- Weight: 18.5 kg(40.78 lb)
MS2601B Standard Accessories
- J0025A /Coaxial cord, 1 m (N-P-5W.5D-2W.N-P-5W) /Qty:1
- F0012 /Fuse,3.15A /Qty:2
- J0017 /Power Cord, 2.5m /Qty:1
- J0104 /Coaxial cord, 1 m (UG-88U.RG55/U.N-P-55U /Qty:1
- Operation manua /MS2601B/K Operation manual /Qty:1
- P0005 /Memory card, 32 kbyte /Qty:1
- Service manual /MS2601B/K Service manual /Qty:1