Product Description:
Anritsu MS710F 100kHz to 23GHz GHz Spectrum Analyzer
The Anritsu MS710F spectrum analyzer is a wide band, very sensitive receiver. It works on the principle of "super-heterodyne receiver" to convert higher frequencies (normally ranging up to several 10s of GHz) to measurable quantities. The received frequency spectrum is slowly swept through a range of pre-selected frequencies, converting the selected frequency to a measurable DC level (usually logarithmic scale), and displaying the same on the CRT of the Anritsu MS710F. The CRT displays received signal strength (y-axis) against frequency ( x-axis).
Some applications for Anritsu MS710F Spectrum Analyzers include Site Monitoring: Verify that the frequency and signal strength of your transmitter is accurate. Interference: Before a system is installed you use a Anritsu MS710F spectrum analyzer to verify that the frequencies (you plan to use) are not occupied or if the presence of a very strong signal will interfere with your new setup. Interference can be created by a number of different situations. Other tests that utilize the Anritsu MS710F spectrum analyzer features include antenna isolation, co-channel interference, adjacent channel power, occupied bandwidth, intermodulation, microwave or satellite antenna alignment, and characterization of components.
Performance Characteristics of the MS710F
| Form Factor |
Benchtop |
| Minimum Frequency |
100 kHz |
| Maximum Frequency |
23 GHz |
| Frequency Accuracy |
5 % |
| Zero Span |
Yes |
| Minimum Span |
1 kHz |
| Maximum Span |
3 MHz |
| Minimum Sweep Time |
2 ms |
| Maximum Sweep Time |
10 s |
| Minimum Resolution Bandwidth |
100 Hz |
| Maximum Resolution Bandwidth |
3 MHz |
| Resolution Bandwidth Steps |
1/3/10 |
| Minimum Video Bandwidth |
1 Hz |
| Maximum Video Bandwidth |
3 MHz |
| Video Bandwidth Steps |
1/3/10 |
| Maximum Single-Side-Band Noise |
-75 dBc/Hz |
| Maximum Safe AC Input |
30 dBm |
| Maximum DC Input |
0 V |
| Minimum Displayed Average Noise |
-115 dBm |
| Maximum Displayed Average Noise |
-88 dBm |
| Maximum Dynamic Range |
-100 dB |
| Maximum Amplitude Uncertainty |
6.6666E-02 % |
| Trigger Source |
External,Internal |
| Trigger Modes |
Freerun,TTL |
| Connector type (main signal) |
Type-N(m) |
| Probe Power |
No |
| Noise Source Driver |
No |
Programmability/Connectivity of the MS710F
| User Interface |
Proprietary
|
| Ports to Peripheral Devices |
GPIB
|
| Test Pattern Storage |
10 Patterns
|
| Novram data storage |
Yes
|
MS710F Compliance
| CE Compliance |
Not on file
|
| UL Compliance |
Not compliant
|
MS710F Power Requirements
| Input Power |
USA (110V/60Hz)
|
MS710F Physical Dimensions
- Width: (N/A)
- Height: 177 mm(6.96 in)
- Length: 451 mm(17.75 in)
- Weight: 27 kg(59.52 lb)
MS710F Standard Accessories
- F0010 /Fuse,1.6A /Qty:1
- F0011 /Fuse, 2 A /Qty:2
- F0012 /Fuse,3.15A /Qty:1
- F0013 /Fuse, 5A /Qty:2
- J0017 /Power Cord, 2.5m /Qty:1
- J0104 /Coaxial Cord, 1m /Qty:1
- W0087AE /MS710 Operation Manual /Qty:1
- W0087BE /MS710 Service Manual /Qty:1