Product Description:
Agilent Technologies Inc. 4395A Network/Spectrum/Impedance Analyzer
Data sheet (PDF)
The Agilent Technologies Inc. 4395A network analyzer is an instrument which measures the complex transmission and reflection characteristics of two-port devices in the frequency domain. It does this by sampling the incident signal, separating the transmitted and reflected waves, and then performing ratios that are directly related to the reflection and transmission coefficients of the two-port. Frequency is swept to rapidly obtain amplitude and phase information over a band of frequencies of interest.
Agilent Technologies Inc. 4395A network analyzers utilize synthesized-frequency sources to provide a known test stimulus that can sweep across a range of frequencies or power levels. Agilent Technologies Inc. 4395A network analyzers also can perform ratioed measurements (including phase), which require multiple receivers. The Agilent Technologies Inc. 4395A can provide a wealth of knowledge about a device under test (DUT), including its magnitude, phase, and group-delay response.
Full-vector network
Spec meas+analy
Wide DynamicRange
Dyna mag/pha acc
+/-0.8dB lvl acc
-145dBm/Hz sensitivity
Built-in HP instru BASIC
Time-gated Spectrum
3.5-inch floppy
RAM disk
Output Accuracy : 1dB
Performance Characteristics of the 4395A
| Form Factor |
Benchtop |
| Type |
Vector |
| Integral Signal Source |
Yes |
| Integral Test Set |
S-Parameter |
| Source Minimum Frequency |
10 Hz |
| Source Maximum Frequency |
500 MHz |
| Source Frequency Resolution |
1 mHz |
| Source Frequency Accuracy |
0.00055 % |
| Minimum Output Power |
0.00000001 Watts |
| Maximum Output Power |
31.6228 mW |
| Power Resolution |
0.1 dB |
| Output Accuracy |
1 dB |
| Output Impedance |
50 Ohm |
| No. of Receiver Channels |
1 ch |
| Receiver Minimum Frequency |
10 Hz |
| Receiver Maximum Frequency |
500 MHz |
| Maximum Dynamic Range |
110 dB |
| Minimum Displayed Average Noise |
-133 dBm |
| Maximum Displayed Average Noise |
-120 dBm |
| Maximum Input Decibel |
-10 dBm |
Programmability/Connectivity of the 4395A
| User Interface |
Proprietary
|
| Ports to Peripheral Devices |
HPIB
|
| Data Storage Type |
FDD
|
4395A Compliance
| CE Compliance |
Not on file
|
| UL Compliance |
Not compliant
|
4395A Power Requirements
| Input Power |
Universal (Auto Sense and Switch)
|
4395A Physical Dimensions
- Width: (N/A)
- Height: 235 mm(9.25 in)
- Length: 553 mm(21.77 in)
- Weight: 21 kg(46.29 lb)