Product Description:
Agilent Technologies, Inc. J2300C Internet Advisor
Integrated solution
Windows 95 - point and click for ease of use with industry-standard user interface.
Pre-written tests for major protocols, including LAN traffic analysis over WAN.
No need to carry an additional PC. HP Internet Advisor lets you retrieve messages, create reports, document test results, or run any standard DOS or MS Windows application.
Pentiumr class, 133 MHz processor, 32 Mbyte PC memory.
3 Gbyte hard drive standard.
1.44 Mbyte flexible disk drive, built-in tracking device, serial and parallel ports.
Two PC-card (Type I/II) slots for modem, NIC, memory, etc.
640 x 480 VGA color display standard; 26.4 cm (10.4 in) diagonal active matrix SVGA optional.
HP Internet Reporter - professional network baseline reports for LAN, WAN and ATM (Order as a separate accessory.)
Quickly isolate and identify network problems at the press of a single key
Determine types of traffic routed over the WAN.
Determine bandwidth being used. Do you need more lines or greater bandwidth, or do you have too much bandwidth and could reduce costs?
Determine who is generating inappropriate traffic.
Verify the operation of your WAN service - Pre-written tests for frame relay, ISDN, X.25, and HDLC.
Verify the quality of your datacom circuit with industry-standard bit error rate tests. >
Full-featured WAN solution
All major interfaces; test from 50 bps asynchronous to 155 Mbps ATM; RS-232/V.24, V.35, V.36/RS-449/V.10/V.11, DDS 4-wire and T1, ISDN, DS3/E3, OC-3/STM-1, ISDN BRI/PRI, X.21 (Meets applicable portion of G.703 and G.704 for 2 Mbps interfaces).
Full monitor and decode of major protocols over any channel, fractional channel, or full T1 or CEPT-E1: frame relay, X.25, HDLC, PPP (LCP), SDLC, SNAP, SNA, ISDN (Q.921/931), async PPP, SMDS, X.21, IPARS, DDCMP, and async.
Analyze encapsulated LAN traffic: TCP/IP, Novell, DECnet, XNS, AppleTalk, 3Com, and IBM SNA.
Simulate X.25, frame relay and ISDN protocols to 2.048 Mbps. Run a pre-written frame relay ping test or place a call on an X.25 network.
Add slide-in modules to test ATM networks at the DS-1, DS-3, CEPT-E1, CEPT-E3 and OC-3c rates with full monitor and simulation capabilities.
Additional
Complete English decodes with customizable displays.
Real-time statistical analysis, including LAN traffic analysis over WAN.
Simultaneous decodes, statistics, triggers, filters, and simulation. Toggle between statistics and data displays real time, and never miss an event.
Filtering for protocols, X.25 calling and called numbers, frame relay DLCI errors, and ISDN SAPI/TEI.
Full-function BERT (bit-error-rate tests) including DS-1, DS-3, CEPT-E1, and CEPT-E3.
Log results to hard disk - statistics, LAN traffic analysis, frame types, errors, etc.
Full remote control and PC data analysis.
Add integrated ISDN monitoring
ISDN solutions for basic rate S/T/U, T1 primary rate, and CEPT-E1 primary rate combine with HP Internet Advisors to form an uncompromised ISDN solution in a multi-protocol environment.
Completely monitor and decode ISDN B and D channels; perform statistical analysis of B and D channel activity.
Monitor and decode LAN traffic carried on ISDN links - an ideal solution for LAN interconnect problems.
Full D channel data Analysis.
Full Level 1, Level 2, and Level 3 decoding in real time (including information elements).
Support for Q.931, ETSI, NI-1 and 14 other signaling decodes.
Decode X.25 D-channel packet data.
Full support for Q.921 and LAP-D.
Full triggering, filtering and searching for SAPI and TEI.
Complete analysis of ISDN user data.
Monitor and decode frame relay, PPP (LCP), X.25, HDLC, SNA and encapsulated LAN traffic.
Extensive B-channel statistics: utilization, throughput, errors, frame types, and LAN traffic.
Protocols:Frame Relay,ISDN,X.25,HDLC,SDL
Modules:ISDN,DS-1/E1,Ds-3/E3,OC-3c/
133MHzProcessor,32MbRAM,3GbHDD,
|
| Stock photo |